Jul 21, 2014

linux lec-02

2.1 Objectives
        This lecture covers:
·  The UNIX filesystem and directory structure.
·  File and directory handling commands.
·  How to make symbolic and hard links.
·  How wildcard filename expansion works.
·  What argument quoting is and when it should be used.
2.2 The UNIX Filesystem
The UNIX operating system is built around the concept of a filesystem which is used to store all of the information that constitutes the long-term state of the system. This state includes the operating system kernel itself, the executable files for the commands supported by the operating system, configuration information, temporary workfiles, user data, and various special files that are used to give controlled access to system hardware and operating system functions.
Every item stored in a UNIX filesystem belongs to one of four types:
1.     Ordinary files

Ordinary files can contain text, data, or program information. Files cannot contain other files or directories. Unlike other operating systems, UNIX filenames are not broken into a name part and an extension part (although extensions are still frequently used as a means to classify files). Instead they can contain any keyboard character except for '/' and be up to 256 characters long (note however that characters such as *,?,# and & have special meaning in most shells and should not therefore be used in filenames). Putting spaces in filenames also makes them difficult to manipulate - rather use the underscore '_'.
2.     Directories

Directories are containers or folders that hold files, and other directories.
3.     Devices

To provide applications with easy access to hardware devices, UNIX allows them to be used in much the same way as ordinary files. There are two types of devices in UNIX -
 block-oriented devices which transfer data in blocks (e.g. hard disks) and character-oriented devices that transfer data on a byte-by-byte basis (e.g. modems and dumb terminals).
4.     Links

A link is a pointer to another file. There are two types of links - a
 hard link to a file is indistinguishable from the file itself. A soft link (or symbolic link) provides an indirect pointer or shortcut to a file. A soft link is implemented as a directory file entry containing a pathname.
2.3 Typical UNIX Directory Structure
The UNIX filesystem is laid out as a hierarchical tree structure which is anchored at a special top-level directory known as the root (designated by a slash '/'). Because of the tree structure, a directory can have many child directories, but only one parent directory. Fig. 2.1 illustrates this layout.
 
Fig. 2.1: Part of a typical UNIX filesystem tree
To specify a location in the directory hierarchy, we must specify a path through the tree. The path to a location can be defined by an absolute path from the root /, or as a relative path from the current working directory. To specify a path, each directory along the route from the source to the destination must be included in the path, with each directory in the sequence being separated by a slash. To help with the specification of relative paths, UNIX provides the shorthand "." for the current directory and ".." for the parent directory. For example, the absolute path to the directory "play" is /home/will/play, while the relative path to this directory from "zeb" is ../will/play.
Fig. 2.2 shows some typical directories you will find on UNIX systems and briefly describes their contents. Note that these although these subdirectories appear as part of a seamless logical filesystem, they do not need be present on the same hard disk device; some may even be located on a remote machine and accessed across a network. 
 
Directory
Typical Contents
/
The "root" directory
/bin
Essential low-level system utilities
/usr/bin
Higher-level system utilities and application programs
/sbin
Superuser system utilities (for performing system administration tasks)
/lib
Program libraries (collections of system calls that can be included in programs by a compiler) for low-level system utilities
/usr/lib
Program libraries for higher-level user programs
/tmp
Temporary file storage space (can be used by any user)
/home or /homes
User home directories containing personal file space for each user. Each directory is named after the login of the user.
/etc
UNIX system configuration and information files
/dev
Hardware devices
/proc
A pseudo-filesystem which is used as an interface to the kernel.  Includes a sub-directory for each active program (or process).
Fig. 2.2: Typical UNIX directories
When you log into UNIX, your current working directory is your user home directory. You can refer to your home directory at any time as "~" and the home directory of other users as "~<login>". So ~will/play is another way for user jane to specify an absolute path to the directory /homes/will/play. User will may refer to the directory as ~/play. 
 
2.4 Directory and File Handling Commands
This section describes some of the more important directory and file handling commands.
·         pwd (print [current] working directory)
pwd displays the full absolute path to the your current location in the filesystem. So
    $ pwdhttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    /usr/bin
implies that /usr/bin is the current working directory. 
 
·         ls (list directory)
ls lists the contents of a directory. If no target directory is given, then the contents of the current working directory are displayed. So, if the current working directory is /,
    $ lshttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    bin   dev  home  mnt   share  usr  var 
    boot  etc  lib   proc  sbin   tmp  vol
Actually, ls doesn't show you all the entries in a directory - files and directories that begin with a dot (.) are hidden (this includes the directories '.' and '..' which are always present). The reason for this is that files that begin with a . usually contain important configuration information and should not be changed under normal circumstances. If you want to see all files, ls supports the -a option:
    $ ls -ahttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif
Even this listing is not that helpful - there are no hints to properties such as the size, type and ownership of files, just their names. To see more detailed information, use the -l option (long listing), which can be combined with the -a option as follows:
    $ ls -a -lhttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
      (or, equivalently,) 
    $ ls -alhttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
 
Each line of the output looks like this:

where:
o    type is a single character which is either 'd' (directory), '-' (ordinary file), 'l' (symbolic link), 'b' (block-oriented device) or 'c' (character-oriented device).
o    permissions is a set of characters describing access rights. There are 9 permission characters, describing 3 access types given to 3 user categories. The three access types are read ('r'), write ('w') and execute ('x'), and the three users categories are the user who owns the file, users in the group that the file belongs to and other users (the general public). An 'r', 'w' or 'x' character means the corresponding permission is present; a '-' means it is absent.
o    links refers to the number of filesystem links pointing to the file/directory (see the discussion on hard/soft links in the next section).
o    owner is usually the user who created the file or directory.
o    group denotes a collection of users who are allowed to access the file according to the group access rights specified in the permissions field.
o    size is the length of a file, or the number of bytes used by the operating system to store the list of files in a directory.
o    date is the date when the file or directory was last modified (written to). The -u option display the time when the file was last accessed (read).
o    name is the name of the file or directory.

ls supports more options. To find out what they are, type:
    $ man lshttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif
man is the online UNIX user manual, and you can use it to get help with commands and find out about what options are supported. It has quite a terse style which is often not that helpful, so some users prefer to the use the (non-standard) info utility if it is installed:
    $ info lshttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
 
·         cd (change [current working] directory)
    $ cd path
changes your current working directory to path (which can be an absolute or a relative path). One of the most common relative paths to use is '..' (i.e. the parent directory of the current directory).
Used without any target directory
    $ cdhttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif
resets your current working directory to your home directory (useful if you get lost). If you change into a directory and you subsequently want to return to your original directory, use
    $ cd -http://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
 
·         mkdir (make directory)
    $ mkdir directory
creates a subdirectory called  directoryin the current working directory. You can only create subdirectories in a directory if you have write permission on that directory.
·         rmdir (remove directory)
    $ rmdir directory
removes the subdirectory directory from the current working directory. You can only remove subdirectories if they are completely empty (i.e. of all entries besides the '.' and '..' directories). 
 
·         cp (copy)
cp is used to make copies of files or entire directories. To copy files, use:
    $ cp source-file(s) destination
where source-file(s) and destination specify the source and destination of the copy respectively. The behaviour of cp depends on whether the destination is a file or a directory. If the destination is a file, only one source file is allowed and cp makes a new file called destination that has the same contents as the source file. If the destination is a directory, many source files can be specified, each of which will be copied into the destination directory. Section 2.6 will discuss efficient specification of source files using wildcard characters.
To copy entire directories (including their contents), use a recursive copy:
     $ cp -rd source-directories destination-directory 
 
·         mv (move/rename)
mv is used to rename files/directories and/or move them from one directory into another. Exactly one source and one destination must be specified:
    $ mv source destination
If destination is an existing directory, the new name for source (whether it be a file or a directory) will  be destination/source. If source and destination are both files,source is renamed destination. N.B.: if destination is an existing file it will be destroyed and overwritten by source (you can use the -i option if you would like to be asked for confirmation before a file is overwritten in this way). 
 
·         rm (remove/delete)
    $ rm target-file(s)
removes the specified files. Unlike other operating systems, it is almost impossible to recover a deleted file unless you have a backup (there is no recycle bin!) so use this command with care. If you would like to be asked before files are deleted, use the -i option:
    $ rm -i myfilehttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    rm: remove 'myfile'?
rm can also be used to delete directories (along with all of their contents, including any subdirectories they contain). To do this, use the -r option. To avoid rm from asking any questions or giving errors (e.g. if the file doesn't exist) you used the -f (force) option. Extreme care needs to be taken when using this option - consider what would happen if a system administrator was trying to delete user will's home directory and accidentally typed:
    $ rm -rf / home/willhttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif
(instead of rm -rf /home/will). 
 
·         cat (catenate/type)
    $ cat target-file(s)
displays the contents of target-file(s)  on the screen, one after the other. You can also use it to create files from keyboard input as follows (> is the output redirection operator, which will be discussed in the next chapter):
    $ cat > hello.txthttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    hello world!http://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    [ctrl-d] 
    $ ls hello.txthttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    hello.txt 
    $ cat hello.txthttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    hello world! 
    $ 
 
·         more and less (catenate with pause)
    $ more target-file(s)
displays the contents of target-file(s)  on the screen, pausing at the end of each screenful and asking the user to press a key (useful for long files). It also incorporates a searching facility (press '/' and then type a phrase that you want to look for).
You can also use more to break up the output of commands that produce more than one screenful of output as follows (is the pipe operator, which will be discussed in the next chapter):
    $ ls -l | morehttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif
less is just like more, except that has a few extra features (such as allowing users to scroll backwards and forwards through the displayed file). less not a standard utility, however and may not be present on all UNIX systems.
2.5 Making Hard and Soft (Symbolic) Links
Direct (hard) and indirect (soft or symbolic) links from one file or directory to another can be created using the ln command.
    $ ln filename linkname
creates another directory entry for filename called linkname (i.e. linkname is a hard link). Both directory entries appear identical (and both now have a link count of 2). If either filename or linkname is modified, the change will be reflected in the other file (since they are in fact just two different directory entries pointing to the same file).
    $ ln -s filename linkname
creates a shortcut called linkname (i.e. linkname is a soft link). The shortcut appears as an entry with a special type ('l'):
    $ ln -s hello.txt bye.txthttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    $ ls -l bye.txthttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    lrwxrwxrwx   1 will finance 13 bye.txt -> hello.txt 
    $
The link count of the source file remains unaffected. Notice that the permission bits on a symbolic link are not used (always appearing as rwxrwxrwx). Instead the permissions on the link are determined by the permissions on the target (hello.txt in this case).
Note that you can create a symbolic link to a file that doesn't exist, but not a hard link. Another difference between the two is that you can create symbolic links across different physical disk devices or partitions, but hard links are restricted to the same disk partition. Finally, most current UNIX implementations do not allow hard links to point to directories.
2.6 Specifying multiple filenames
Multiple filenames can be specified using special pattern-matching characters. The rules are:
·         '?' matches any single character in that position in the filename.
·         '*' matches zero or more characters in the filename. A '*' on its own will match all files. '*.*' matches all files with containing a '.'.
·         Characters enclosed in square brackets ('[' and ']') will match any filename that has one of those characters in that position.
·         A list of comma separated strings enclosed in curly braces ("{" and "}") will be expanded as a Cartesian product with the surrounding characters.
For example:
1.     ??? matches all three-character filenames.
2.     ?ell? matches any five-character filenames with 'ell' in the middle.
3.     he* matches any filename beginning with 'he'.
4.     [m-z]*[a-l] matches any filename that begins with a letter from 'm' to 'z' and ends in a letter from 'a' to 'l'.
5.     {/usr,}{/bin,/lib}/file expands to /usr/bin/file /usr/lib/file /bin/file and /lib/file.
Note that the UNIX shell performs these expansions (including any filename matching) on a command's arguments before the command is executed.
2.7 Quotes
As we have seen certain special characters (e.g. '*', '-','{' etc.) are interpreted in a special way by the shell. In order to pass arguments that use these characters to commands directly (i.e. without filename expansion etc.), we need to use special quoting characters. There are three levels of quoting that you can try:
1.     Try insert a '\' in front of the special character.
2.     Use double quotes (") around arguments to prevent most expansions.
3.     Use single forward quotes (') around arguments to prevent all expansions.
There is a fourth type of quoting in UNIX. Single backward quotes (`) are used to pass the output of some command as an input argument to another. For example:
    $ hostnamehttp://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    rose 
    $ echo this machine is called `hostname`http://www.doc.ic.ac.uk/~wjk/UnixIntro/enter.gif 
    this machine is called rose


No comments:

Post a Comment

Than 'Q'